The repair process is coming to an end. All works are done in order - ceiling, walls, then floor. The last stage in the repair is to give the final aesthetics and charm to the apartment. To do this, glue the ceiling baseboard.
For the joints of the ceiling with the walls, it is mainly applicable to the edging border or skirting board. How to choose this decor element correctly? It happens that various textures, sizes and drawings. It can also be bent or, conversely, bend. With a length of 1.3 to 2 meters. If the ceiling level is low, it is better to use a narrow skirting board. Wide models visually make the room below. It is important that the baseboard is combined with the walls. A plain tone of the wall makes it possible to play with a pattern and texture. The skirting board can be made of various raw materials. This is polyurethane, polystyrene or polystyrene. Polyurethane has a high degree of melting. He does not absorb odors and does not get wet. He is elastic. This is of great importance if the room has rounded corners, because it is easy to bend. However, the price of such material is greater than a simple foam plinth.
To perform the work, carpentry is necessary - this is a box under the outer angles with holes. There are ready -made elements for angles on sale. You will need: pencil; meter; skirting board; Clay composition. You can also use special sealants, liquid welding, silicone or putty for gluing.
How to glue a ceiling plinth? It is lubricated with glue on one side and attached to the wall and ceiling. But the surface is uneven, so it is necessary to press the bar without bending it. If the void formed, then it is filled with sealant with a syringe. Experts advise with such work to start its implementation from a shorter wall.
About the choice of glue. You need to use a special polymer composition designed for ceiling skirting boards. Thanks to a large choice, you can choose them in any of the construction markets. But not everyone loves to use such compositions due to the fact that they need to be withstanded for a long time for high-quality gluing. Therefore, many people for working with skirting boards for the ceiling use adhesive compounds as a clock, master clock, PVA or putty.
A flat pruning of joints. The most difficult thing in such work is the correct pruning with the docking of the corners. Here you need a knock, which allows you to accurately cut the bar under the desired angle with your own hands. This angle is most often equal to 90 or 45 degrees. Then you just need to check the exact docking of the skirting boards.
Final processing. At the end of gluing the skirting boards, they are put off and cleaned in the joints. After that, it is advisable to treat the baseboard with a soil composition, as this is mandatory for subsequent painting. You can leave a white tint or choose a tone for the ceiling or walls. But you can arrange a contrast. Then the painted skirting boards must be covered with a special mounting ribbon in order to protect from other paint. Online Casinos for Real Money ▶ Updated for August 2022 Safe for Canadian players Real money bonuses, games & more! Best Online Casino Canada Free & Real Money Canadian Players Love these Real Money Casinos. Playing for Free vs Playing for Real Money.